Vent covers
We needed to create vents on the north and south sides of the dome. This picture shows the plywood cover used to create the vents.
posted by Dome Dweller @ 12:29 PM
0 Comments
Off Grid Passive Solar Monolithic Dome
This blog describes the building of an off grid passive solar monolithic dome. After the building of the dome is finished, I will write about living off the grid, wind and solar power, energy efficiency, sustainable living and growing organic food. Start with April 2008 for the chronological story. Press Ctrl + End to get to the bottom of the page. That is where the story begins.
Wednesday, April 30, 2008
We needed to create vents on the north and south sides of the dome. This picture shows the plywood cover used to create the vents.
About Me
- Name: Dome Dweller
- Location: Canada
My husband and I started building our off grid monolithic dome in 2005. We had the shell built for us, but we are finishing the inside ourselves. This blog is the story of the construction of the dome and living off the grid.
Previous Posts
- Did you have to cut cinder blocks?
- East Side
- Did you cover the whole floor with cinder blocks?
- More cinder blocks
- Laying the cinder blocks
- Moving the cinder blocks into the dome
- The passive solar floor
- Big chunks of concrete
- Leveling the floor
- What is passive solar?
Subscribe to
Posts [Atom]
0 Comments:
Post a Comment
Subscribe to Post Comments [Atom]
<< Home