Void forms for vents
This is a picture of the void form and it's cover which was screwed onto the plywood.
posted by Dome Dweller @ 2:22 PM
0 Comments
Off Grid Passive Solar Monolithic Dome
This blog describes the building of an off grid passive solar monolithic dome. After the building of the dome is finished, I will write about living off the grid, wind and solar power, energy efficiency, sustainable living and growing organic food. Start with April 2008 for the chronological story. Press Ctrl + End to get to the bottom of the page. That is where the story begins.
Wednesday, April 30, 2008
This is a picture of the void form and it's cover which was screwed onto the plywood.
About Me
- Name: Dome Dweller
- Location: Canada
My husband and I started building our off grid monolithic dome in 2005. We had the shell built for us, but we are finishing the inside ourselves. This blog is the story of the construction of the dome and living off the grid.
Previous Posts
- Pex pipe in the kitchen area
- Pex pipe for infloor heating
- Rebar grid for the floor
- Floor outlet
- Under floor conduit
- The cinder blocks below the vent cover
- Vent covers
- Did you have to cut cinder blocks?
- East Side
- Did you cover the whole floor with cinder blocks?
Subscribe to
Posts [Atom]
0 Comments:
Post a Comment
Subscribe to Post Comments [Atom]
<< Home